(Command sequence error)

• If you want to burn an Audio CD with CD-Text burn and insert a HP 8200 or a HP 8210 and are using Nero version up to 4.0.5.0, then please update to a newer Nero version.
• If you use one of the following types of CD Writer :

Compro CW-7502, Matsushita CW-7502, Panasonic CW-7502, Plasmon CDR480

And the error occurs straight away at the beginning of simulation or of the burning process.

Please upload a more up-to-date Firmware for your CD Writer . On the Nero WebSite you will find numerous links to up-to-date Firmware versions.

• If you use SCSI Geräte einsetzen:
• Please look in recommended hardware settings and set these SCSI hostadapter settings. In particular with Yamaha CD burners both of the following options should be set:

Initiate Sync Negotiation=No and Maximum Sync Transfer Rate=5

• It is possible that the SCSI-devices are not connected correctly or the SCSI-chain is not terminated correctly. Please look at SCSI cabling and termination .

• If you are using IDE devices:
• Please check if the error message also occurs if you connect the drive to the primary port.
• If you are using the original Windows 95 version or Windows 95a, then please update the files ESDI_506.PDR and VOLTRACK.VXD. On this, see recommended updates.
• If you are using an Intel mainboard, Windows 95 (up to OSR2) and the busmaster driver, then please update the busmaster drivers (to at least 3.02): http://developer.intel.com/design/chipsets/drivers/busmastr/index.htm